Viking Cues at Schmidt Billiards and Game Rooms Columbia Missouri MO

 

     
  Buy Viking Cues Now Online Store  
     
  Home Game Rooms and
Billiards Supplies Main Site
 
     
  Viking Cues Home  
  Pool Cues Options  
  Pool Cues Facts  
  Pool Cue Joints  
  Pool Cue Shafts  
  Pool Cue Weight  
  Pool Cue Parts List  
  Viking Cues Warranty  
     
  Contact Us  
     
  Viking Pool Cue Care  
  Viking Pool Cue Repair  
  Pool Cue Tip Repair  
     

 

Pool Cue Weight

All Viking cues feature an interchangeable pool cue weight bolts system. Changing the pool cue weights is an easy process that takes only a couple of minutes. Here’s your simple guide to changing the pool cue weights in a Viking cue.

Step 1: Determine the pool cue weight.

Step 2: Unscrew the rubber bumper.

Step 3: Using the hex key, determine are there cue weight bolts in the cue. It may be necessary to remove existing cue weight bolts and install a new cue bolts to make the cue lighter or heavier.

Step 4: Apply silicone gasket adhesive/sealant.

Pool Cue Weights - Viking Pool Cue Weight Bolts System - Silicone SealantApplying a silicone gasket adhesive/sealant on the cue weight bolts will help keep them in place.

When stacking pool cue weight bolts be sure to use the adhesive/sealant on the ends of the cue weight bolts as well.

Step 5: Carefully thread the cue weight bolt down into the cavity of the cue with the hex key until the bolt is snug.

Pool Cue Weights - Viking Pool Cue Weight Bolts System - Hex ToolUse extra care when starting to thread the cue weight bolts so as to avoid stripping out the threads.

A small table-top lathe or power drill with the appropriate hex bit works well too.

If you must use the hex tool, it is quicker if two people are involved - one turning the hex tool and the other turning the cue in the opposite direction.

Step 6: Thread the bumper back into the butt of the cue.

Pool Cue Weights - Viking Pool Cue Weight Bolts System

The tools of the trade: a 1/4-inch T-handle hex key (minimum of 9 inches long) and 1-ounce, 1.5-ounce, and 2-ounce weight bolts.

Also required: silicone instant gasket adhesive and/or sealant and a cleaning rag.

Optional items: digital scale and lathe or power drill.

The natural weight of each model varies as does the amount of weight added to each cue to achieve a desired weight.

The maximum amount of weight that can be added to any cue is five ounces (any combination of the three weight bolt sizes to make five ounces).

Weight bolts and hex keys are available only to dealers. To have the weight changed please send your Viking cue to Schmidt Billiards and Game Rooms.


For more on Viking Cues please check links on this site. For pool cue repair  and cue tip repair please visit Pool Table Service.

For home game rooms and billiards supplies visit our main billiards store site.

Thank you for your visit.
 

Viking Cues @ Schmidt Billiards and Game Rooms
2525 Bernadette Sq., Columbia, MO 65203 | Hours: M-Sat 10-5:30
Toll Free Phone: (877)362-2837 | Phone: (573) 445-4010 | Fax: (573) 446-5473